Deriva y tunelización R32
Se utiliza principalmente para la voladura de carreteras en grandes minas metálicas subterráneas, la perforación de agujeros de anclaje, la excavación de túneles ferroviarios y de carretera, túneles de desviación de agua en proyectos hidroeléctricos y fábricas subterráneas.
Email:emaw@thindustrials.com
Las herramientas de deriva y excavación de túneles están compuestas por taladros, tuberías de perforación, adaptadores de mango de cuchillo y mangas de conexión.
R32 (1 1/4″)
| Button bit ( R32) | Dimensions (D) | Flushing hole (mm) | Buttons (mm) | Angle | Class | Part no. | |||
| mm | mm | Front No size |
Gauge No size |
Front No size |
Gauge No size |
||||
 |
45 48 51 |
1 3/4” 1 7/8” 2” |
2×5.5 1×5 1×5.5 |
1×5.5 2×6 2×6 |
5×11 5×11 5×11 |
2×9 2×9 2×10 |
30° 30° 30° |
H H H |
3045R3207 3048R3207 3051R3207 |
 |
43 45 48 |
1 11/16” 1 3/4” 1 7/8” |
2×5 2×5 2×5 |
2×5 2×5 2×5.5 |
6×9 6×10 6×10 |
2×8 2×9 2×9 |
30° 30° 30° |
S S S |
3043R3208 3045R3208 3048R3208 |
 |
43 45 48 54 |
1 11/16” 1 3/4” 1 7/8” 2 1/8” |
2×5 1×5 1×5 1×5.5 |
3×4 3×5 3×5 3×6 |
6×10 6×10 6×10 6×11 |
3×8 3×8 3×9 3×10 |
30° 30° 30° 35° |
M M M M |
3043R3209 3045R3209 3048R3209 3054R3209 |
 |
45 48 51 54 57 |
1 3/4” 1 7/8” 2” 2 1/8” 2 1/4” |
1×5 1×5 1×5.5 1×5.5 1×6 |
3×5 3×5 3×5.5 3×6 3×6 |
6×10 6×10 6×10 6×11 6×11 |
3×8 3×9 3×9 3×10 3×10 |
30° 30° 35° 35° 35° |
M M M M M |
3045R32F09 3048R32F09 3051R32F09 3054R32F09 3057R32F09 |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×11 | 4×10 | 35° | M | 3064R32F10D |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×12 | 3×11 | 35° | H | 3064R32F09 |
 |
76 | 3” | 2×7 | 2×9 | 8×11 | 6×10 | 35° | H | 3076R32F14 |
 |
51 | 2” | 1×6 | 3×5 | 6×10 | 3×9 | 30° | M | 3051R3209R |
 |
54 57 |
2 1/8” 2 1/4” |
1×5.5 1×6 |
3×6 3×6 |
6×11 6×11 |
3×10 3×10 |
35° 35° |
M M |
3054R3209R 3057R3209R |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×11 | 4×10 | 35° | M | 3064R3210DR |
 |
64 | 2 1/2” | 1×6 | 3×7 | 6×12 | 3×11 | 35° | H | 3064R3209R |
| Reaming Tools (R32) | Dimensions (D) | Flushing hole (mm) | Buttons (mm) | Angle | Part no. | |||
| mm | inch | Front No size |
Gauge No size |
Front No size |
Gauge No size |
|||
Dome bit |
76 89 102 |
3” 3 1/2” 4” |
2×7 2×8 2×9 |
2×9 2×9 2×9 |
14×11 14×12 14×12 |
1×11 1×12 1×12 |
35° 35° 35° |
3076R3215K 3089R3215K 30102R3215K |
Pilot bit 12°taper |
41 | 1 5/8” | 2×5.5 | 2×5 | 4×9 | 2×8 | 30° | 3040R3206K |
Reaming bit 12°taper |
89 102 |
3” 1/2” 4” |
—— —— |
—— —— |
8×11 8×12 |
4×10 4×12 |
35° 35° |
3089R3212K 30102R3212K |
| Drill Rod (R32) | Dimensions (L) | Dimensions (D) | Part No. | |||
| mm | Ft | inch | mm | inch | ||
Hex rod 25*108 with thread R32 |
1830 2435 2950 3050 |
6 8 9 10 |
– – 7 5/8 – |
25 25 25 25 |
1 1 1 1 |
1025R3218 1025R3224 1025R3229 1025R3230 |
Hex rod 32 with threads R32/R38 |
3100 3700 4310 4920 |
10 12 14 16 |
2 2 2 2 |
32 32 32 32 |
1 1/4 1 1/4 1 1/4 1 1/4 |
2132R38R3231 2132R38R3237 2132R38R3243 2132R38R3249 |
| Hex rod 35 with threads R32/R38
|
3100 3700 4310 4920 5530 |
10 12 14 16 18 |
2 2 2 2 2 |
35 35 35 35 35 |
1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 |
2135R38R3231 2135R38R3237 2135R38R3243 2135R38R3249 2135R38R3255 |
Hex rod 32 with threads R32/T38 |
3100 3700 4310 4920 |
10 12 14 16 |
2 2 2 2 |
32 32 32 32 |
1 1/4 1 1/4 1 1/4 1 1/4 |
2132T38R3231 2132T38R3237 2132T38R3243 2132T38R3249 |
| Hex rod 35 with threads R32/T38
|
3100 3700 4310 4920 5530 |
10 12 14 16 18 |
2 2 2 2 2 |
35 35 35 35 35 |
1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 |
2135T38R3231 2135T38R3237 2135T38R3243 2135T38R3249 2135T38R3255 |
| Rod 32 with threads R32/R32
|
1830 2435 2950 3050 |
6 8 9 10 |
– – 7 5/8 – |
32 32 32 32 |
1 1/4 1 1/4 1 1/4 1 1/4 |
2032R3218 2032R3224 2032R3229 2032R3230 |
| Rod 32 with threads R32/R32 (MF)
|
3100 3700 4310 4920 |
10 12 14 16 |
2 2 2 2 |
32 32 32 32 |
1 1/4 1 1/4 1 1/4 1 1/4 |
2032R32MF31 2032R32MF37 2032R32MF43 2032R32MF49 |
| Coupling (R32) | Dimensions(D) | Length (L) mm |
Part no. | ||
R32-R32 |
45 | 1 3/4” | 150 | 6” | MX-R324515 |
Crossover coupling R32-R35 |
45 | 1 3/4” | 175 | 6 7/8” | MX-R35R324517 |
Crossover coupling R28-R32 |
45 | 1 3/4” | 171 | 6 3/4” | MX-R32R284517 |
Crossover coupling R32-R38 |
54 | 2 1/8” | 181 | 7 1/8” | MX-R38R325418 |
Crossover coupling R32-T38 |
54 | 2 1/8” | 188 | 7 1/2” | MX-T38R325418 |
| Note: Middle stop sleeves will be manufactured upon receipt of your orders | |||||
Consulta
Aquí puede enviar cualquier pregunta y nos pondremos en contacto con usted lo antes posible. No divulgaremos la información que envíe a nadie, puede estar seguro.
Inquiry